Release Note
- [3.2.24] - 2022.07.18
Features:
- Z-Wave functionality improvement
- Z-Wave Support of multichannel devices
- Triggerable Virtual Device for Sensibo ACs
- Hide option for every device
- Hide and disable option for Trigger Automations
- Detect ZWave USB stick automatically if is connected
- SD card optimalization
- Associated automations get for every stateregister
- Implementation of Swagger
- Condominium flag
- New Thermostat device type in Virtual Devices
- Implementation of KNX on serial port
- Faster initial boot
- Bruteforce login defense
- Stream proxy for doorphones
- Default "Off" states instead of "Unkown"
- Show only Hardware ID compatible devices on "Replace Device"
- Background pinger for network diagnostics
- New chronology calculation and map picker on Config Site
- Don't allow to restore a newer backup file to an older controller
- Port groupping
- Sensibo ForceSync option on ConfigSite
- Heating-Cooling
- Big improvement of stabilization
- Actor turn on delay
- Custom hysteresis (both up/down)
- Global reference URL support
- Security notification improvements
- Entry/exit delay
- Set security level from trigger automations
- NightMode
- Custom percent for every shutter/venetian
- Deactivator button
- Turn on cooldown feature on lights
- Trigger Automations
- Big improvement of stabilization
- Push notification on trigger
- Support zones both to trigger or actor
- Implementation
- YAML backup download/upload
- YAML synchronization
- [3.0.9] - 2021.09.13
Features:
- Switchbee is no longer supported from version 3.0
- Heating-cooling refactoring and stability improvement. Also made some changes to the logic to prevent unnecessary acting.
- Fixed a heating zone delete error where you removed a valve actor before you removed the zone itself
- Location és Category refactoring
- RS232 custom baud rate change possibility
- Air Conditioner support with Sensibo
- Introducing Uponor heating and cooling system integration
- Heating-cooling global settings are now available on Rest API
- Advanced logging are now available to find easily what is the source of triggering actions to actors
- Swap SD cards are now allowed between different Controller units
- Custom units and rounding for analog values and impulse counting on NONC ports are now available
- Weather station connection improvements for Renkforce WH2600
- Fixed gate automation state feedbacks in HomeKit integration
- Child lock and dew pont warnings are implemented onto NGBS iCON integration
- Swap outputs option for Shutter modules are now apearing only if the correct firmware version are installed to the modules
- New standalone weather station view are supported with Renkforce WH2600
- Closed beta: First implementation of Chameleon's own Wireless radio communication on 433Mhz
- Closed beta: Zwave pairing possibilities with Dimmers, Switches and Shutters. Also introduced the assosiation groups function and parameter-value configuration for devices (Ask to activate this feature)
- [2.11.1] - 2020.11.02
Features:
- Custom RS-232 integration
- REST API integration
- WiFi
- HomeKit integration rewrite
- Warning! Devices will need to be reconfigured if the device database of an older controller is regenerated.
- Feedback LED signalling rewrite
- Solid white: OS boot, you can't even ping the controller.
- Blinking white: Controller update or first boot setup is in progress.
- Blinking red: Controller is starting (or crashed). SSH is available.
- Blinking blue: The config site is available through local network but there's no VPN connection.
- Blinking green: The config site is available remotely as well.
- [2.10.0] - 2020.07.10
Features:
- SwitchBee support
- [2.9.0] - 2020.07.01
Features:
- Google Home integration
- [2.8.3] - 2020.06.17
Features:
- One-click update system
- Trigger based automation
- Updated to Raspbian Buster (2020-02-13)
- [2.7.0] - 2019.12.06 (2.7.0.img-sha256.txt, 2.7.0.img-sha512.txt)
Features:
- Controller update requests
- Camera integration
- Doorphone integration
- Add new supported sensors to analog inputs
- Trigger button automation
- WC ventilation automation
- Gate opener automation
- Alarm clock automation
- Scenario automation
- Timetable automation
- Enable/Disable remote access function
Bugfix:
- Fingerprint handling fix
- Backup & restore fix
- Config site UX/UI fixes
- Stability fixes
- Starting Night mode fix
- LS communication fix
- Nightmode rgbw fix
- [2.6.0] - 2019.05.06
Features:
- Nightmode automatization
- Holiday mode and presence simulation
- Device search button
- Add remote buttons to DIN Chameleon Controller and DIN Relay Extension devices
- NGBS Icon2 end to end integration
Bugfix:
- Stability fixes
- LS RGBW dimmer fix
- 2.5.0 - 2019.02.26
Features:
- Multiroom Heating and Cooling automation implemented
- Remote button function implemented
- Integrate ngbs icon100/200 thermostat to heating system
- New supported chameleon device: LS RGBW dimmer
Bugfix:
- Fibaro integration improvements
- Uptime fix
- Rename "loxoneId" fields to "serialId" in Config Site
- Set default timezone Eurpoe/Budapest
- 2.4.4 - 2018.11.19
Features:
- New supported chameleon device: DIN Chameleon Controller 1.2
Bugfix:
- Stability fixes
- 2.4.3 - 2018.10.19
Bugfix:
- Stability fixes
- 2.4.2 - 2018.10.10
Bugfix:
- Stability fixes
- 2.4.1 - 2018.09.03
Bugfix:
- Fail-safe backup
- Remove device temperature from LS - Dimmer
- 2.4.0 - 2018.08.27
Features:
- New supported chameleon devices: LS IR Module, DIN Temperature Extension
- Show device temperature in LS - Dimmer
Bugfix:
- Controller now able to start even if SRAM has invalid values
- Resume child communication fix
- 2.3.4 - 2018.08.01
Features:
- Alpha version of Web interface for users has been added to the /interface url
- 2.3.3 - 2018.07.20
Features:
- New supported chameleon device: DIN Shutter Extension 8
- +1 supported device per LS channel
- Send controller version with heartbeat
Bugfix:
- Inels device delete fix
- Fibaro integration improvements
- 2.3.2 - 2018.07.13
Bugfix:
- Apple Homekit light controlling improvements
- 2.3.1 - 2018.07.12
Features:
- Release notes link added to about menu
Bugfix:
- Apple Homekit light controlling improvements
- Missing device diagnostic registers has been readded
- 2.3.0 - 2018.07.09
Features:
- New communication layer introduced to support 2 channel LS extension
- 2.2.3 - 2018.07.05
Features:
- Automatically expand filesystem to the maximum capacity of SD card
- New "Successful" message notification on finished firmware upgrades
- New version of Inels RF box (RF-003 and RF-WI-003) API integration (Authentication implemented)
- SD Card image size reduced to 4GB
Bugfix:
- Controller now able to start even if SRAM has invalid values
- Apple Homekit is now automaticly running at the background
- Version recognition improved in firmware upload (No difference between 1.1.0 and 1.1)
- Maximum fingerprint count field added to security devices management
- 2.2.2 - 2018.06.15
Features:
- Chameleon's mobile application is now supported from this version
- The following new Inels devices are supported now:
RFSA-11B, RFSA-62B,RFSAI-61B, RFSA-61M, RFSA-66M
Bugfix:
- Favicon added to Config Site